Quote Originally Posted by tumbleweed View Post
Are you aware of what's been commented out in the code you're showing?

Post the entire code as it is.
Thanks for the reply. Yes i will post later today the code. But i understand the logic using MISTERE's calculator for EUART and it worked fine. But As the GPS at default is working at 9600, i need to speed it up to 38400. So at this point baudarate change on the fly needs a different settings.

I have configured the code in order to change the baudrate as mentioned on my previous posts, and from the SERIAL TERMINAL, on the computer i see that TX from PIC to GPS is working fine.

But the RX of the PIC looks like is not receiving or is not reading the info.

In any case i will post the entire code later.

Thanks once again.