Hi Richard,
i got confused. Really im reading the datasheet and there is nowhere clear setting for using external crystal.
I came up with the following
Code:
OSCCON = %01110000 ; 64Mhz
OSCTUNE.6 = 1 ; Enable 4x PLL
Because i was thinking that in order to specify the OSCCON, and the multiplier PLL we need to add those lines even if it is for internal or external source. I didnt think that those where valid only for internal OSC.
So what should i add as OSCCON value, as i use and external crystal 16Mhz? How do i specify the OSCCON value for 64Mhz?
thanks once again. Apologize for all my questions.
Bookmarks