Hi Richard,

Thanks for taking the time to help.

I was too quick in my last post - I had not upgraded to PBP3.0.10 when I did those tests, I guessed it was a MPASM issue...

I then installed PBP3.0.10 and repeated the exercise - it's all good! No error messages and zero verification errors when burning the chip. In hindsight I should have done everything first and then posted - Doh!

Thanks for the info on copying the results area, a great resource I'll make a note of. I hope these findings are useful for others who may experience similar difficulties.

Thanks again and best regards,
Bill