PIC16f877a bcd seven segment controling through four inputs

[MHaziq]

Hi,
I am trying to make a BCD seven segment display which takes input from 4 bits (port d) and gives output at port b for lsb and port c for msb what I am tryin to do is I take the input and I will subtract it with a value which I stored in w register if the result is zero than accordingly I will turn on or turn off those pins at port b and c. Every time I will change values every time in w register here is my code i make it for only showing 14 and 15. but its not working can any one help me.

RES_VECT CODE 0x0000 ; processor reset vector
GOTO START ; go to beginning of program

; TODO ADD INTERRUPTS HERE IF USED
FIXED EQU 20h
;INPUT EQU 21h
;output_LSB EQU 22h
;output_MSB EQU 23h
MAIN_PROG CODE ; let linker place main program
START

BSF STATUS,RP0
MOVLW b'00000000' ;making all pins of port b as output
MOVWF TRISB
MOVLW b'00000000' ;making all pins of port c as output
MOVWF TRISC
MOVLW b'00001111' ;making first 4 pins of port d as input
MOVWF TRISD
BCF STATUS,5
;MOVF PORTD,W
;MOVWF PORTB
;CLRF PORTD
MAIN_LOOP
BCF STATUS, 2 ;CLEAR STATUS REGISTER PIN 2
CLRF PORTD ;CLEARING ALL PORT D PINS
MOVF PORTD, W ;TAKING VALUES FROM PORTD AND STORING IN W REGISTER
MOVWF FIXED ;MOVING VALUE FROM W REGISTER TO VARIABLE FIXED
MOVF b'00001111',W ;MOVING 15('F') TO W REGISTER
SUBWF FIXED, 0 ;SUBTRACTING VALUE OF W REGISTER FROM FIXED AND STORING RESULT IN W REGISTER
BTFSS STATUS,2 ;BIT TEST IF ZERO REGISTER OF STATUS REGISSSTER IF IT IS SET. SKIP NEXT LINE
MOVLW b'00000101' ; TRANSFERING 5 ON PORT B "WHICH IS LSB OF OUTPUT"
MOVWF PORTB
MOVLW b'00000001' ;TRANSFERING 1 ON PORT C "WHICH IS MSB OF OUTPUT"
MOVWF PORTC
GOTO LINEAR_1 F
GOTO MAIN_LOOP

LINEAR_1
MOVF PORTD ,W
MOVF b'00001110',W ;MOVING 14('E') TO W REGISTER
SUBWF FIXED, 0 ;SUBTRACTING VALUE OF W REGISTER FROM FIXED AND STORING RESULT IN W REGISTER
BTFSS STATUS, 2 ;BIT TEST IF ZERO REGISTER OF STATUS REGISSSTER IF IT IS SET. SKIP NEXT LINE
GOTO LINEAR_2
MOVLW b'00000100' ;TRANSFERING 4 ON PORT B "WHICH IS LSB OF OUTPUT"
MOVWF PORTB
MOVLW b'00000001' ;TRANSFERING 1 ON PORT C "WHICH IS MSB OF OUTPUT"
MOVWF PORTC
BSF PORTD,7
GOTO MAIN_LOOP

END

[Dave]

I'm no assembler pro but, shouldn't this line :MOVF b'00001111',W ;MOVING 15('F') TO W REGISTER be something like this: MOVLW b'00001111',W ;MOVING 15('F') TO W REGISTER?

[Scampy]

I thought it was a forum for PicBASIC pro

[Art]

Yes, execution will be looking at address 15 for a file value which is probably zero instead of moving the literal 15 to w.
Probably a typo because setting w with a literal is done properly elsewhere.

Code still makes no sense. Both copies to portC will always execute. Both values are 1 for now, but won’t be in application.
You need to skip a goto, not skip a line. Otherwise you just sent the last value in w which was 15.
If the code does what you want you only see a mash of the two values you want on the LEDs anyway.
Both overall display values 14 & 15 would be written alternately very fast.

This forum has always supported assembly where it relates to PBP, and so it should, but from start to finish belongs on Microchip’s forum.
If you link to a new post there, it looks easy to sort out, but I don’t think it should happen here.

[Art]

w = portd
portb = w & b00001111
w = w >> 4
portc = w

Maybe that’s a more appropriate answer
PBP can’t do anything that can’t be done in assembler.
No need to ever check anything unless there are possible values you want to discount.