PIC16F1503 Fixed Voltage Reference

[Aussie Barry]

Thanks Richard.

The PIC is being fed via a liner regulator so I am not that interested in reading Vdd.
I want to read the battery voltage feeding this 5V linear reg. The battery also feeds a 6V buck regulator.
I have the ADC pin fed via a voltage divider.
All works well until the battery voltage drops sufficiently cause Vdd to droop, thus throwing off my ADC readings and battery status indicator LEDs.

Given there are numerous pin compatible devices which allow the FVR module to be used as a reference voltage for the ADC, I believe my easiest path forward is to change devices.
These are not expensive devices (~AUD$1.50 for single unit purchase) so making the change has no real drawbacks.

Cheers
Barry
VK2XBP

[richard]

yes that method is only good for reading vdd , in the past I have used the dac module along with the comparator module for that purpose [16f648a from memory], even built a mppt solar regulator too. the dac can set high low trigger points for the comparator. resolution of about 0.1 volts is about the best you can achieve that way