WTV020-SD-20SS SD Card U Disk Audio Player Interface

[Normnet]

I built a PBP wav player with a 18F26K20 48MHz which read mono data at 44k at 8bit resolution. This was non FAT.
Audio as well as GLCD are a cool choice of project as one can hear/see the results.

Norm

[aerostar]

I have used a number of different modules - the one I like is this http://geekmatic.in.ua/pdf/Catalex_MP3_board.pdf, I made a speaking clock connected to MSF receiver. (Can be done with GPS)

You have to put a wire to one one side of the playback indicator if you want a busy signal, this I used to check if the module was already playing, and when the file playback had finished. (needed for composing messages)

About 80 individual mp3 files whole announcements controlled with 16F628A

( )

[andybarrett1]

Hi Aerostar

Thank you for reply.... Your choice of MP3 Player looks a lot easier to us than my initial choice, I am not a software guy :-)

Have you any sample code I can look at for ideas... I know I am being cheeky :-)

BR
Andy