Maybe a Nextium LCD that works as an HMI?
Ioannis
I am leaning toward a Bluetooth module... as you suggest. I see here (in the forum) there are some discussed, but I know next to nothing for myself. If anyone has an example, a recommendation - or can point to one... or an alternative... I'd appreciate hearing about it.
As always, thank you.
Amoque
Here's a challenging option:
Use an old cell (or even your personal cell) that has android 4 or higher (I think you need that to interface).
Pick an android BASIC of your choice, and use that as a remote., interfacing via bluetooth to your PIC.
No need for displays or controllers, your cell acts as an all-in-one, except for the need for a IC that can receive bluetooth, or using a bluetooth interface chip.
That's how I would do things today.
Robert
EDIT: Level 2 challenge:
Interface via the interwebs so you can change stuff and monitor at will from anywhere.
Last edited by Demon; - 4th January 2018 at 16:39.
My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.
Not as dumb as yesterday, but stupider than tomorrow!
Bookmarks