SSD1306 INCLUDE for PBP3

[fethiye]

Thanks for information

[spcw1234]

Richard, I am hoping you can help me with an issue I am having making your SSD1306 driver work. Everything is working well except when I display a bitmap with the y axis not set at 0 it cuts the image in half. I have tried with every version of the ssd1306_I2C.INC found in this thread with the same result. Posted here is the code with a simple 16x16 bitmap icon and an image of it displayed at both y=0 and y=4. Any chance you can help sort what is going on here?

 '****************************************************************
'*  Name    : ssd1306_DEMO.PBP                                   *
'*  Author  : richard                                            *
'*  Notice  :                                                    *
'*          :                                                    *
'*  Date    : 19/11/2017                                         *
'*  Version :                                                    *
'*  Notes   :                                                    *
'*          :FOR pic 18F26K22              SSD1306               *
'****************************************************************
#CONFIG
  CONFIG  FOSC = INTIO67
  CONFIG  PLLCFG = ON
  CONFIG  PRICLKEN = OFF
  CONFIG  FCMEN = OFF
  CONFIG  IESO = OFF
  CONFIG  PWRTEN = OFF
  CONFIG  BOREN = SBORDIS
  CONFIG  BORV = 190
  CONFIG  WDTEN = ON
  CONFIG  WDTPS = 32768
  CONFIG  CCP2MX = PORTC1
  CONFIG  PBADEN = OFF
  CONFIG  CCP3MX = PORTB5
  CONFIG  HFOFST = ON
  CONFIG  T3CMX = PORTC0
  CONFIG  P2BMX = PORTB5
  CONFIG  MCLRE = EXTMCLR
  CONFIG  STVREN = ON
  CONFIG  LVP = OFF
  CONFIG  XINST = OFF
  CONFIG  DEBUG = OFF
  CONFIG  CP0 = OFF
  CONFIG  CP1 = OFF
  CONFIG  CP2 = OFF
  CONFIG  CP3 = OFF
  CONFIG  CPB = OFF
  CONFIG  CPD = OFF
  CONFIG  WRT0 = OFF
  CONFIG  WRT1 = OFF
  CONFIG  WRT2 = OFF
  CONFIG  WRT3 = OFF
  CONFIG  WRTC = OFF
  CONFIG  WRTB = OFF
  CONFIG  WRTD = OFF
  CONFIG  EBTR0 = OFF
  CONFIG  EBTR1 = OFF
  CONFIG  EBTR2 = OFF
  CONFIG  EBTR3 = OFF
  CONFIG  EBTRB = OFF
#ENDCONFIG
DEFINE OSC 64 
OSCCON = %11110000           

char var byte
x    var byte  
y    var byte    
BUFF VAR BYTE[16]          

ANSELb = 0
ANSELA = 0
ANSELC = 0

;use this define for hw i2c 
#define hwi2c 1           'SCL=C.3 & SDA=C.4

;set and uncomment these to use softi2c
'SCL var PortC.3      ' I2C Clock
'SDA var PortC.4      ' I2C Data

;set these  to match display
ssdheight con 7      ; 7 = 8 PAGES  64*128 ,  3 = 4 pages 32*128
ssdwidth  con 127    ; 128 PIXELS WIDE
sdd1306_addr con $78
Include "ssd1306_I2C.INC"  ' bring it in
include "font7x5_18.bas"


'==========================    MAIN  Routine    ==============================

pause 100
gosub glcd_init
GLCD_CLR
BIG_TEXT = 0

main: 
    SSDBM 112,0,16,16 ,StallIcon ;x,y,w,h,label   Y=0 (DISPLAYS OK)
'    pause 100
'    SSDBM 112,0,16,16 ,BlankIcon ;x,y,w,h,label                  

'    SSDBM 112,2,16,16 ,StallIcon ;x,y,w,h,label   Y>0 (DISPLAYS HALF OF IMAGE)
'    pause 100                    
'    SSDBM 112,2,16,16 ,BlankIcon ;x,y,w,h,label                 

    SSDBM 112,4,16,16 ,StallIcon ;x,y,w,h,label   Y>0 (DISPLAYS HALF OF IMAGE)
    pause 1000
'    SSDBM 112,4,16,16 ,BlankIcon ;x,y,w,h,label               

'    SSDBM 112,6,16,16 ,StallIcon ;x,y,w,h,label   Y>0 (DISPLAYS HALF OF IMAGE)
'    pause 100
'    SSDBM 112,6,16,16 ,BlankIcon ;x,y,w,h,label           
goto main    
end   

StallIcon:    '16x16 BMP image
@ db   248, 4, 226, 241, 57, 25, 25, 193, 241, 121, 25, 25, 241, 226, 4, 248
@ db   15, 16, 35, 71, 78, 76, 78, 71, 67, 64, 76, 78, 71, 35, 16, 15


BlankIcon:    '16x16 BMP image
@ db   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
@ db   0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

[richard]

Any chance you can help sort what is going on here?

yep, i never did test with other than 64x64 bmps, that masked the fault
now we know it works with 64x64 and 16x16 bmps at least

there is a defect in the include file, the bmp usercommand macro is not quite right

in the include file the bit in red needs to be added in

SSDBM?CCCCL   macro Xin ,Yin ,Win,Hin,BMin 
 IFNDEF  TBLPTRL
    ERROR BITMAPS ONLY SUPPORTED ON PIC18
 ENDIF
     MOVE?CB Xin , _gx
     MOVE?CB Yin , _gy
     MOVE?CB Hin/8+Yin-1 , _gy_
     MOVE?CB Win+Xin-1 , _gx_
     MOVE?CW Win*Hin/8 , _glcd_rad
     banksel   _glcdbm
     movlw low BMin
     movwf _glcdbm
     movlw high BMin
     movwf _glcdbm +1
     BANKSEL 0
     L?CALL  _ssd_bitmap
      endm

[richard]

latest version

[spcw1234]

Thank you, Richard! That works perfectly! You have no idea how much time I spent attempting to fix that.

One other request. I am struggling to understand the macros but would like one that can do a point to point line. Something that would do x1,y1 to x2,y2. Can you assist with adding a macro to accomplish this?

[richard]

One other request. I am struggling to understand the macros but would like one that can do a point to point line.

not possible with this small footprint method , horizontal and vertical lines is the best it can do

if you want full graphics use this
https://www.picbasic.co.uk/forum/sho...741#post146741

[spcw1234]

I was afraid that would be the case. I have spent time playing with that version and can't figure out how to display a bitmap image, which is a requirement for this project. That's using DMDBMP command.

If I copy in the macro from this version and add the SSDBM command, I can display an image, but not correctly. Likely due to the difference in how the height differs from both drivers.