PIC18F1320 HPWM on 2 pins

[richard]

DEFINE DEBUG_Mode 0

IS INCORRECT and simply won't do anything

pbp defines must be uppercase


try it this way tx:-

DEFINE DEBUG_MODE 0
DEFINE DEBUG_BAUD 9600



DEBUG "*.*",DEC5 GLCDBM ,13,10




rx


SERIN2 PORTC.7,84,[ WAIT("*.*") , DEC RX] ;





if this is still your goal

So I guess its waaaay easier to use two
PICs than to scramble everything in just one

then you are sadly misguided , its never easier . get a better chip that's way easier
if your goal is different why not start a more relevant thread

either way post your latest code

[Mugelpower]

Hello Richard,

thank you for your fast answer.

I Know about the upper case sensitivity of Defines but it was obviously too late yesterday.

Didn´t know DEBUG and SERIN2 can be mixed.

I always thought how would one PIC know when to receive without handshake. Tried HSERIN for that with the RX and TX lines.

Didn´t work of course althoug both PICs have a USART.

Will try that at home this evening because its about noon by now and I´m at work. Nothing with PICs, just metal and engines.

regards

Mugel

[Mugelpower]

Hello Richard,

by using the right PIC you may think of something like this:

http://www.microchip.com/wwwproducts/en/PIC16F15323

I don´t believe PBP supports that one or similar new ones.

I´m shure with 10 (or 30) more IQ points I could program an older one thats supported by PBP

but I´m stuck to my own miserable brain.


regards
Mugel

[Dave]

Actually Mugel, PBP3.1 does support the PIC16F15323. At the cost of a few extra pins might I suggest something like the PIC18F26K22. It has 2 USART ports and can run @64Hhz.

[Mugelpower]

ahhh,

you are trying to talk me weak for buying PBP3?

may work......

[Mugelpower]

Hello Richard,

i tried your example and i get compilation error "DEBUG " bad expression or "SERIN2 bad expression"

I even used a PBP example that was delivered with my software and I get the same "HSERIN bad expression" compilation error.
So I have a software problem but I don´t know where to search.

[richard]

i tried your example and i get compilation error "DEBUG " bad expression or "SERIN2 bad expression"

a totally meaningless statement


you need to post the complete code you are trying , also state the version of pbp you are using

[Mugelpower]

Hello Richard,

I´m using an old PC that runs XP Professional.
MPLAB IDE v 7.61
Microcode Studio 3.0.0.5
Compiler Picbasic Pro 2.50C
Programmer PICKIT2 and 3


Complete Code:


'************************************************* ***************
'* Name : AnalogDEBUG *
'* Author : [Davidpower] *
'* [select VIEW...EDITOR OPTIONS] *
'* : All Rights Reserved *
'* Date : 05.12.2017 *
'* Version : 1.0 *
'* Notes : 16F88 no LCD *
'* : Portb.7 analog IN 0-5V *
'************************************************* ***************


Include "modedefs.bas"

Define OSC 4
Define ADC_BITS 4 ' Set number of bits in result
Define ADC_CLOCK 3 ' Set clock source (3=rc)
Define ADC_SAMPLEUS 50 ' Set sampling time in uSec
DEFINE DEBUG_REG PORTB
DEFINE DEBUG_BIT 2
DEFINE DEBUG_BAUD 9600
DEFINE DEBUG_Mode 0
DEFINE DEBUG_PACING 1000



CMCON = 7 ' Disable analog comparator
ANSEL = %01000000 ' set AN6 (RB7) as analog, others to digital
ADCON1.7 = 1 '

GLCDBM VAR WORD


PAUSE 1000 ' lcd settle time
DEBUG 10,13

loop:
ADCIN 6,GLCDBM ' Read channel 6 (RB7)

DEBUG "*.*",DEC5 GLCDBM,13,10


Goto loop

End


The DEBUG line gives the compiling error "bad expression"

If I use for example :

DEBUG GLCDBM

then no compiling error shows up. Doesn´t mean that it works.