LCD BARgraphs

[Darrel Taylor]

Seems like a lot of work to rewrite a program to use a different Case, when you can just turn off case sensitivity for MPASM, and use any case.

For MicroCode Studio Plus:

From View | Picbasic Options... | Assembler Tab and Options tab
uncheck the "Case sensitive" Checkbox
Press OK

The Microchip MPASM checkbox must be checked to see the Case option.

For other editors, or dos:

Add -c to the MPASM command line.

<br>

[crematory]

Hi darrel

I could have said that, as a matter of fact, being careful about letter cases while writing a code, prevented me of throwing that note about "uncheck the Case sensitive Checkbox", thats all darrel,

[Christopher4187]

I have never used an include file other than the ones provided with PBP. I am getting an error trying to load the include file from Darrel. The only thing I can think of is that I have it in the wrong place. Can someone tell me where I have to put it?

Thanks,

Chris

[Darrel Taylor]

What does the error say?
<br>

[Christopher4187]

The message says:

"WARNING: Unable to open INCLUDE file LCDBAR_INC.BAS."

[Darrel Taylor]

The file above is renamed with an extension of .txt, because the forum won't let you upload .bas files. So make sure you rename it to just LCDBAR_INC.BAS

Place the file in the same folder as the main program, and you should be good to go.
<br>

[Christopher4187]

I tried everything and it still doesn't work. I have it in the same folder as the main program. I'm stumped.