SDFS3 SD Card File System Errors

[mityeltu]

I have one of the OpenLog cards. It works well, but I want to use a full size SD card and have it run either from my native code or at worst, a pic18f. You're right thoguh, it works well and will work for my current application. I just want something different (full size sd card, or maybe thumb drive). Either way, I would also like to understand how all this works, and right now I'm drowning.

[J. Mark Wolf]

I don't know if you're aware of the uMMC from Rogue Robotics (see link below). They're kinda pricey but they might save your hair.

https://roguerobotics.com/products/ummc

Also, check out the link below for thumb drive interface;

http://www.futureelectronics.com/en/...IVE2.aspx?IM=0

[mityeltu]

Yeah, that uMMC is a bit on the "way over my budget" side of things. BUT... the Vdrive looks promising. Thank you for the info. I would llike to be able to do this for myself, but at this point, maybe it's a "who cares" moment and I should just cut my losses.

Thanks again.

[J. Mark Wolf]

I would llike to be able to do this for myself, but at this point, maybe it's a "who cares" moment and I should just cut my losses.

Thanks again.

Been there, done that!

[Art]

Microchip’s MDDFS works flawlessly (albeit slow compared with Chan’s FatFS),
but it’s written in C, and meant to be compiled with one of MC’s C compilers.
It beats me how Darrel could have used it with BASIC without converting the whole library.

Older versions of this library also suffer some serious bugs, and don’t support SDHC until later on.