Problem Keeping PORTD.1 LOW

Results 1 to 40 of 49

Threaded View

  1. - 8th September 2005, 14:33 #30
    koossa's Avatar
    koossa
    koossa is offline Member
    Join Date
    Dec 2004
    Posts
    262

    Did you find this post helpful? Yes | No

    Default

    I think I'm starting to get some progress.
    If I write the code, as below, my ONA does not turn on when measured with a multi-meter.
    But if I put a LED over PORTD.0 (ONA) AND GND and I press the on button, it flickers.
    So with the loop ONA does not stay high, but flickers
    Without the loop ONA does stay high?

    <img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=477&stc=1" border=1">
    Attached Images Attached Images  
« Previous Thread | Next Thread »

Similar Threads

  1. Old and beyond help ?
    By DavidFMarks in forum mel PIC BASIC Pro
    Replies: 46
    Last Post: - 11th December 2008, 15:23
  2. confused problem with interrupt in a working program
    By illuminator4 in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 14th November 2008, 17:01
  3. Microcontroller with 2 way paging application problem
    By oneohthree in forum mel PIC BASIC Pro
    Replies: 30
    Last Post: - 20th April 2007, 17:27
  4. Problems with RC2 and RC3
    By Christopher4187 in forum General
    Replies: 11
    Last Post: - 29th May 2006, 17:19
  5. 4-line LCD Help - using PortA instead of B
    By Tom Gonser in forum mel PIC BASIC Pro
    Replies: 28
    Last Post: - 31st March 2005, 03:14

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules