thank you mister_e

I had alway used the $0 and $90 because a guy sent me some code and he used it. but I did not know what it meant. but it worked.
I 1st.did the code below with it and it worked. and then I did the code looking things up in the data sheet (like you suggested) and again it worked.

INTCON.4=1 'ENABLE RA2 EX. INT.
OPTION_REG.6=0 'SET RA2/INT FOR FALLING EDGE
INTCON.1=0 'RESET RA2/INT

ON INTERRUPT GoTo BUMP


I was thinking it might be some kinda wild card that reset everything.
don't laugh at my code I just learning.

DEVICE pic16f630
@ DEVICE pic16f630, INTRC_OSC_NOCLKOUT
@ DEVICE pic16f630, WDT_ON
@ DEVICE pic16f630, MCLR_OFF
@ DEVICE pic16f630, CPD_OFF '16F630 TEST
@ DEVICE pic16f630, BOD_OFF
@ DEVICE pic16f630, PWRT_ON
@ DEVICE pic16f630, PROTECT_OFF
DEFINE OSC 4
Pause 20000 'ALLOW TO STABILIZE AFTER POWER UP Allow
TRISA = %00101100 'MAKE A.5,A.2 & A.3 INPUTS
TRISC = %00000000 'MAKE ALL PORTC OUTPUTS

OPTION_REG.7 = 0 'ENABLE PULL-UPS
WPUA = %00110111 'WEAK PULL-UPS ON PORTA



SYMBOL GREEN = PORTC. 'GREEN LED
SYMBOL TRIG = PORTA.2 'INTERUPT INPUT
SYMBOL NOW = PORTA.5 'NONE INTERUPT INPUT
SYMBOL ORG = PORTC.2 'ORG LED
SYMBOL RED= PORTC.3 'RED LED

TRIG= 0
GREEN = 0
NOW = 0
ORG =0
RED =0
GREEN=1 'power up ok
Pause 4000
GREEN= 0
Pause 2000

IF NOW =0 Then GoTo LONG 'SELECT LONG OR BUMP
GoTo MAIN

MAIN
'OPTION_REG=$0
INTCON.4=1 'ENABLE RA2 EX. INT.
OPTION_REG.6=0 'SET RA2/INT FOR FALLING EDGE
INTCON.1=0 'RESET RA2/INT

ON INTERRUPT GoTo BUMP
'INTCON=$90


REFRESH:
Sleep 20 'EVERY 20 SEC. TURN A DIFFRENT LED ON FOR 6SEC. THEN OFF
ORG=1
Pause 6000
ORG=0
Sleep 20
GREEN=1
Pause 6000
GREEN=0
Sleep 20
RED=1
Pause 6000
RED=0



GoTo REFRESH

Disable


GoTo MAIN

BUMP:

GREEN = 1 'GREEN LED ON
Pause 1500 'FOR 1.5 SEC.
ORG=1 'ORG LED ON
Pause 1500 'FOR 1.5 SEC.
RED = 1 'RED LED ON
Pause 3000 'HOLD FOR 3 SEC.
GREEN=0 'GREEN LED OFF
ORG=0 'ORG LED OFF
RED=0 'RED LED OFF


INTCON.1=0
Disable

GoTo MAIN



LONG
GREEN=1
Pause 3000
GREEN=0
Pause 1000
RED=1
Pause 3000
RED=0
Pause 1000
ORG=1
Pause 3000
ORG=0

INTCON.1=0

GoTo LONG
Enable