vpp must be asserted before vcc to enter pgm mode
see this for the reason that the pickit must supply the power if your interested [figure2.2]
http://ww1.microchip.com/downloads/e...Doc/41191D.pdf
|
Re: how to reprogram 12f675 and 12f629 ?
vpp must be asserted before vcc to enter pgm mode
see this for the reason that the pickit must supply the power if your interested [figure2.2]
http://ww1.microchip.com/downloads/e...Doc/41191D.pdf
Warning I'm not a teacher
|
Re: how to reprogram 12f675 and 12f629 ?
Ambrogio,
I am curious as to how you reassigned the functions of these pins. As far as I know it is not possible. The pins can be used for other things such as MCLR can be used as an INPUT, but if programing voltage is applied it is once again part of the programming chain.
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks