Wait for a string on a serial port

[flotulopex]

MAIN:
SERIN2 DataIn,BdRate,[WAIT("Identifier"),Switch]
IF Switch = $31 THEN TX_ON = 1
IF Switch = $30 THEN TX_ON = 0
GOTO MAIN
END

...or in serialtool send Identifier#1...

Thanks Richard, it works well expecting HEX values ($30 and $31) but it will not work with Identifier#1.

[richard]

Thanks Richard, it works well expecting HEX values ($30 and $31) but it will not work with Identifier#1.

command parsing needs to be enabled in your transmit window

[right click in tx window] to see menu

[flotulopex]

Thanks Richard. I should have tried this...