Mechanique Bootloader

[richard]

You need to keep MPLABX updated to support newer chips. You can choose to install just the IPE and that should get you newer part support for programming. MPLABX allows you to install multiple versions so you can always keep v2.35 around too.
Installing the IPE should get you the command-line tools.

confirmed . I bit the bullet and installed ide/ipe ver 3.55 and version 2.35 still works [yeah]
and the pk3 can pgm the new chips from mcspx.

the pbp toolchain does not work with mplabx 3.55 as suspected [for me anyway],code will still compile though.

for reference the icsp (no connector fitted) port on the "Curiosity Board" will not actually work as programmer ,I guess the pkob interferes with the process ,making mplabx pkob the only programmer that works but only for ide versions that the pbp3 plugins don't function in . would have been nice to use the board with pbp3 easily.


progress is over rated

[tumbleweed]

I haven't tried the curiosity board yet so I don't know how the ICSP connector fits into the picture.

making mplabx pkob the only programmer that works

There's an mplabx command-line tool 'ipecmd.exe' supposedly similar to 'pk3cmd.exe' that sounds like it should work with any of the programmers,
and it has a PKOB setting. There's a readme in the docs folder. Might be worth trying that w/the curiosity.

[richard]

There's an mplabx command-line tool 'ipecmd.exe' supposedly similar to 'pk3cmd.exe' that sounds like it should work with any of the programmers,
and it has a PKOB setting. There's a readme in the docs folder. Might be worth trying that w/the curiosity.

thanks it's alive
the ipecmd command line utility can be used to program your curiosity board from mcs ide

programmer filename ipecmd.exe
command line -tSBURxxxxxxxxx -p$target-device$ -f$hex-filename$ -e -m


where BURxxxxxxxxx is the serial no of your curiosity pkob

it works very nicely

[PBCGuy]

Guys

Couldn't connect to this site or Proton for the last two days.

Bootloader has become a side project. I have serial and parallel port hardware programmers as side projects too.

Thank you for the comments.