Amicus 18 FTDI driver on W10?

Results 1 to 23 of 23

Threaded View

  1. - 14th April 2017, 17:14 #16
    tumbleweed's Avatar
    tumbleweed
    tumbleweed is offline Senior Member
    Join Date
    Aug 2011
    Posts
    461

    Default Re: Amicus 18 FTDI driver on W10?

    I've never tried building the bootloader using mplabx, and I only have the UMC stuff from swordfish and proton so take this with a grain of salt...

    Some of the [PATH] options in the umc.ini file specify the MPASM and DB paths. You can fool it to use mpasmx.exe as the assembler, but if umcbuild is looking for the old *.dev files from MPLAB you might be SOL trying to use mplabx.

    On my system I have
    Code:
    DB=d:\program files\microchip\mplab IDE\device
    which is where the old mplab *.dev files were/are located on my setup. MPLABX doesn't have these files anymore, or if it does they're buried deep inside some .jar file that I've never found.

    You might just be forced to install MPLAB.
    Last edited by tumbleweed; - 14th April 2017 at 17:17.
« Previous Thread | Next Thread »

Similar Threads

  1. Amicus shields
    By Bruce in forum PBP & Amicus18
    Replies: 33
    Last Post: - 30th July 2011, 23:06
  2. AMICUS 18 Section
    By charudatt in forum Forum Requests
    Replies: 26
    Last Post: - 17th July 2011, 11:03
  3. Amicus Name
    By Charles Linquis in forum PBP & Amicus18
    Replies: 12
    Last Post: - 31st May 2011, 06:01
  4. Amicus 18 Review
    By lester in forum General
    Replies: 0
    Last Post: - 10th June 2010, 08:58

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules