MCS is Crashing


Closed Thread
Results 1 to 40 of 44

Thread: MCS is Crashing

Hybrid View

  1. #1


    Did you find this post helpful? Yes | No

    Default Re: MCS is Crashing

    Quote Originally Posted by mark_s View Post
    Hi Robert, it's actually Picster that beleives the crashing is from using italics in the IDE. I was trying to change a DEFINE OSC statement and every time I hit a key it would crash. This happened only to the file from my flash drive. I could edit files on my hard drive? I switched to non italics, just in case this actually is the cause.

    I think a real test would be to leave italics checked. When a crash occurs switch to non-italics and see if it stops.

    If you read through both threads on this subject. You will find there is no pattern or consistancy, so difficult to trouble shoot.
    Note that a DEFINE statement is also likely in a specified "different" font/color, causing it to be processed "on the fly" as you're typing... same problrem, different manifestation. Were you using italics for Defines?

  2. #2
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    3,172


    Did you find this post helpful? Yes | No

    Default Re: MCS is Crashing

    I've always used default MCSP settings.

    My laptop used is a HP Pavillion i5 Intel/nVidia.

    I'll try later typing a long-winded comment and see how that goes.

    Robert
    My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.

    Not as dumb as yesterday, but stupider than tomorrow!

  3. #3
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    3,172


    Did you find this post helpful? Yes | No

    Default Re: MCS is Crashing

    Nope, long-winded comments, a DEFINE OSC 10 thrown in, more comments, no problem.

    Robert
    My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.

    Not as dumb as yesterday, but stupider than tomorrow!

  4. #4


    Did you find this post helpful? Yes | No

    Default Re: MCS is Crashing

    Quote Originally Posted by Demon View Post
    Nope, long-winded comments, a DEFINE OSC 10 thrown in, more comments, no problem.

    Robert

    Perhaps I'm not approaching this with the same attack...

    If this was a "sure thing" that ALWAYS happened, it would be pretty easy to resolve. However, my experience is it's very hit and miss - hence I don't believe a crash can be "forced", there are other undetermined variables involved, but... again... because it ALWAYS when I'm typing, I believe that says something. It can sit idle for DAYS and nothing happens. I'm wondering if others who are experiencing this can avoid crashes by trying this change, thereby contributing to the validation of the theory - not try to FORCE another crash when it's unpredictable and not a "sure thing".

  5. #5
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    3,172


    Did you find this post helpful? Yes | No

    Default Re: MCS is Crashing

    Well then, I guess I'll just keep an eye open and report back f anything happens. But MCSP has never bombed on me in over a year on this laptop.

    I honestly cannot see how graphic drivers have anything to do with data entry, especially in software that emulates Notepad (no special characters).

    But then again, my specialty was mainframe programming. I only program PCs when I sleep at the Holiday Inn.

    Robert
    My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.

    Not as dumb as yesterday, but stupider than tomorrow!

  6. #6


    Did you find this post helpful? Yes | No

    Default Re: MCS is Crashing

    Just crashed, not using italics. So much for that theory. HOWEVER, it still crashed while I was typing in a comment field, which has always been the case for me.

  7. #7
    Join Date
    Apr 2011
    Location
    Welches, Oregon
    Posts
    198


    Did you find this post helpful? Yes | No

    Default Re: MCS is Crashing

    I find it highly unlikely that it has anything at all to do with PBP (other than the obvious interruption to it). If so, I would think every user (having the exact same files loaded) would have the exact same issue - and, one would suppose, it would not be difficult to duplicate for the same reasons. I think that it must be some interaction with another process or service - perhaps a background application using the com port, USB access or internet connection- there are dozens of running programs active from the moment the power is turned on.

    Has anyone disabled the files that start at power up? It is one of my pet peeves is manufacturers who seem to believe they own all of my computer's resources because I use one of their applications. I have found HP, Nvidia, and Adobe to be nearly criminal in their dis-care, but they are far from the only culprits. Starting with a minimal set-up and adding one line or application at a time may help to isolate what resource is causing the issue?

Similar Threads

  1. MicroCodeStudioPlus keeps crashing.
    By c_moore in forum PBP3
    Replies: 67
    Last Post: - 20th February 2018, 13:18
  2. Crashing 16F628 Code
    By hhaplant in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 24th March 2012, 09:40
  3. Crashing LCD
    By George in forum Off Topic
    Replies: 13
    Last Post: - 16th January 2012, 21:05
  4. pic program crashing
    By comwarrior in forum General
    Replies: 5
    Last Post: - 8th July 2009, 16:33
  5. Crashing program
    By Charles Linquis in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 6th April 2006, 02:57

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts