Ebay HC-12 wireless transceivers

[n0yox]

Thank you, Richard the link was helpful as was yours and Charlie’s comments .My project is back on track with the code below

Transmitter Code 16F616:
Tx:
SEROUT PORTC.5,2,[2] 'sends 2 to the HC-12 every 3 seconds
PAUSE 3000
GOTO TX

Receiver Code 16F628A:
OVER:
SERIN2 PORTB.2,84,3000,OVER,[V1]
IF V1 = 0 THEN GOTO OVER
SEROUT PORTB.5,6,[#V1,10] 'Output to serial Monitor
GOTO OVER

[jeffer]

buenas tardes tengo problemas mi hc 12 no se conecta no envía datos hice el código como está y no agradecería si alguien me puede ayudar

DEFINE OSC 4


include "modedefs.bas"


LEDS VAR BYTE


CMCON=7


TRISA=$FF


TRISB=%00000000


PORTB=0


PORTA=0


PAUSE 50


INICIO :


SEROUT PORTB.2,2,[2]
PAUSE 1000
GOTO INICIO


END

[jeffer]

y este es el codigo que uso para el receptor:

DEFINE OSC 4


include "modedefs.bas"


LEDS VAR BYTE


CMCON=7


TRISA=$FF


TRISB=%00000000


PORTB=0


PORTA=0


HIGH PORTB.0
PAUSE 1000
LOW PORTB.0


INICIO:


SERIN2 PORTB.1,84,300,INICIO,[LEDS]


IF LEDS=2 THEN


PORTB.0=1


PAUSE 500


ENDIF
goto inicio

[Ioannis]

Maybe you will have better luck in english...