got it. in the front of the code, i put the following
@ __CONFIG _CONFIG1H, _INTIO2_OSC_1H
@ __CONFIG _CONFIG2H, _WDT_ON_2H & _WDTPS_128_2H
@ __CONFIG _CONFIG3H, _MCLRE_ON_3H
@ __CONFIG _CONFIG4L, _LVP_OFF_4L

but you have to go into PBP's 18F2220.INC and remark out the following...
NOLIST
ifdef PM_USED
LIST
"Error: PM does not support this device. Use MPASM."
NOLIST
else
LIST
LIST p = 18F2220, r = dec, w = -311, f = inhx32
INCLUDE "P18F2220.INC" ; MPASM Header
; __CONFIG _CONFIG1H, _XT_OSC_1H
; __CONFIG _CONFIG2H, _WDT_ON_2H & _WDTPS_128_2H
; __CONFIG _CONFIG3H, _MCLRE_ON_3H
; __CONFIG _CONFIG4L, _LVP_OFF_4L
NOLIST
endif
LIST
EEPROM_START EQU 0F00000h
BLOCK_SIZE EQU 8

Thanks...