Pic to GSM Phone connection (HSerin problems)

[PoTeToJB]

Hai, could anybody help me on how to built a device (pic) connected to handphone and pc where i can control input just by sending sms. i already search through internet and iam trying to built one. could anybody help me. i want to use PIC16F84A as the controller as iam doing alot of thing with this MCU and control by nokia 3310. may be somebody could provide me the step and all the hex file that i need to built one. i interested on this project but have lack of experience!
please give me a guide

[PoTeToJB]

helllo

can same one tell me, what phone can support AT Command

please...

[Ioannis]

Nokia, Erricson, Siemens, Wavecom modules, Telit modules....

[PoTeToJB]

helllo

Ioannis..

I now Nokia, Erricson, Siemens, Wavecom modules have at command but not all model have at command.

i try to find nokia model (6310,6210) ,Erricson model (T28,T68) in my country but i can't find't.

can u give me what modal can support at command

i try to do same project like kasamiko ( post #90 ). if i use another phone can i use the kasamiko schematic.

sorry my engglish is not good.. i am malay boy

[Ioannis]

When I experimented with phones I used the ones you mentioned.

But when it comes to industrial projects or commercial that should be a complete device... do not think of using a mobile phone. Instead look for a module like Telit if you can solder the extremely thin connector or a Siemens - Ericsson and more easy the Wavecom which has a VGA-15 connector.

Language is not a problem. I am not native speaking too.

Ioannis

[kasamiko]

I've been using a Nokia 6210 and has a working SMS Controller FULLY working with 4 output to drive a relay and 4 input for sensors..
Also capable of sending SMS messages to the Master phone.

Current usage:

Anti carnapping for vehicles..will send SMS to master phone when any of the 4 sensors will be activated. the owner of the car will simply send simple command to turn off the vehicle engine, turn on the light and horn.

Future plan:

I will be adding a VOICE Module so the carnap vehicles can scream " I'M BEING CARNAPPED!" literally..

Regards

[PoTeToJB]

hello, every one..

now i success send sms using pic 16f84a and nokia 3310.. i use pic to push hp button...

My next problem is to read incomming msg (SMS) and send the data to VB6 and MS access .. i use Sony Erricsson T610. i want build database.. for the system i need use pic or i can directly send the msg to VB..

can someone help me..

i need your help..

---> i need use pic or not.
---> i want know how to send msg data to VB and MS Access.
---> want now how to build database and link to MS access.

thank for help..

[BruMans]

I've been using a Nokia 6210 and has a working SMS Controller FULLY working with 4 output to drive a relay and 4 input for sensors..
Also capable of sending SMS messages to the Master phone.

Current usage:

Anti carnapping for vehicles..will send SMS to master phone when any of the 4 sensors will be activated. the owner of the car will simply send simple command to turn off the vehicle engine, turn on the light and horn.

Future plan:

I will be adding a VOICE Module so the carnap vehicles can scream " I'M BEING CARNAPPED!" literally..

Regards

i'm interested on this. could you share your code here?

[chrisv2879]

I've been using a Nokia 6210 and has a working SMS Controller FULLY working with 4 output to drive a relay and 4 input for sensors..
Also capable of sending SMS messages to the Master phone.

Current usage:

Anti carnapping for vehicles..will send SMS to master phone when any of the 4 sensors will be activated. the owner of the car will simply send simple command to turn off the vehicle engine, turn on the light and horn.

Future plan:

I will be adding a VOICE Module so the carnap vehicles can scream " I'M BEING CARNAPPED!" literally..

Regards

Hi Kasamiko
I´ve been trying with a 5120i TDMA phone but nothing!. The pinout of this cellphone says that the pin 4 is Analog ground, so i cant take 2,8V from there. Can u help me?.
thanks