Connected Tx line from the phone through max232 to pic. Nothing.
Than i desided to hook it up to pc. So the phone is receiving commands from the pic and outputting them to the pc.
Here is what i get:

AT#0D [len=2] <------it echoes AT command from the pic??
#0D[len=0]
OK#0D [len=3] <------ that is the answer
at+cgmm#0D [len=7] <-----command to display model number(also echoed?)
#0D[len=0]
S65#0D [len=4] <----- answer
#0D [len=1]
OK#0D [len=3]

So, now it is 100% clear, that phone is answering. But why then pic does not receive anything??? With or without max, i cant receive answers!