hi again
finally got this working with the circuit from here
http://www.atrox.at/datacable/dlr3/index.html
i omitted the max232 and just wired the rx and tx to the resistors
the following works great
serout2 portb.5, 396,["atz",cr]
serout2 portb.5, 396,["atd +447890563875;",cr]
but when trying to get a response from the pic with the following it just hangs
serout2 portb.5, 396,["atz",cr]
serin2 portb.4,396,[wait("ok")]
so i tried
serout2 portb.5, 396,["a"]
serin2 portb.4, 396,[b0]
Lcdout b0
and it did echo back the a, so i do have 2 way comms
anyone have any idea how best to get an ok back from the phone?
thanks, Stu
Bookmarks