Hello All,

I have the hardware set up using an LM393 (0v to -1.55v) to shift to standard TTL/CMOS. I am able to see the data by setting the calipers to 1" and analyzing the waveform to get 20480 (which is the resolution per inch) . It is being clocked out LSB to MSB. I have the PIC packing 3bytes but like I said it is backwards.

I have most of the supporting readout code done and tested with dummy variables. The only thing holding me up is flipping the data around and scaling it (scaling factor already worked out). I will fiddle around with your suggestion.

Thanks again!!!

Best Regards,
Nick