Programming RFM radio modules in Basic

**camerart** · - 9th October 2016, 10:54

Originally Posted by richard

No problem , but I don't particularly want to support it [ there is a slight bug in the reset fifo sequence too ,should be $ca81 from memory I think]
you realise of course that rfm69's are quite a different animal

Hi Richard,
I have been using: http://www.hobbyking.com/hobbyking/s..._Receiver.html for a couple of years. They are programmed using a Chrome APP and have RFM22 chips on them, so I can play with them, while I learn how to program later modules RFM69 and 96 for example.

I hoped they would be similar, so once learnt, a different module could be programmed with few adjustments to the program.

I now have 4 BASIC programs, gleaned from the net, that I can follow, and as you say it does look daunting. I have to convert one or more into Oshonsoft basic, for my system and skills.
I've just got this one into Oshonsoft (compiles), but there are errors. So I commented out those bits with >>>>>>>>>>>>>>>>>>>> for correction later. I've enclosed it in case you see obvious mistakes (Clutching at straws!!)

I realise your time is valuable.
Regards, Eric.