ENG4444,

See SEROUT and LCDOUT commands in PBP manual. You will need to set up your LCD as shown in the LCDOUT section.

A few of the first SEROUTS in the first program convert as follows (the rest should be relatively straight forward if you read SEROUT and LCDOUT sections of the manual):

Serial LCD Commands
Parallel LCD Commands

SEROUT GPIO.0,6,[254,1]
LCDOUT 254, 1

SEROUT GPIO.0,6,[72,72,58,77,77]
LCDOUT 72,72,58,77,77

SEROUT GPIO.0,6,[254,X,#HH]
LCDOUT 254,X,#HH

Good Luck,

Paul Borgmeier
Salt Lake City, Utah USA
www.cruxanalysis.com