Pbp3 - pic18f87k22 / pic18f67k22 setting config typo error ???

[richard]

google translate

hello, I would like to program the fuses of the PIC18F2550 correctly for a good operation of the program of this multi battery charger. I do not know how to proceed in picbasic to write the command lines. Quartz of 4 mhz pwrt off mclr off cdp off wrt off I can supply the full program of this charger in picbasic ..

you don't say what version of pbp you are using
for pbp3 to get an OSC of 48mHz from a 4mHz xtal you would use

#CONFIG
  CONFIG  PLLDIV = 1
  CONFIG  CPUDIV = OSC1_PLL2
  CONFIG  USBDIV = 2
  CONFIG  FOSC = HSPLL_HS
  CONFIG  FCMEN = OFF
  CONFIG  IESO = OFF
  CONFIG  PWRT = OFF
  CONFIG  BOR = ON
  CONFIG  BORV = 3
  CONFIG  VREGEN = ON
  CONFIG  WDT = ON
  CONFIG  WDTPS = 512
  CONFIG  CCP2MX = ON
  CONFIG  PBADEN = OFF
  CONFIG  LPT1OSC = OFF
  CONFIG  MCLRE = OFF
  CONFIG  STVREN = ON
  CONFIG  LVP = OFF
  CONFIG  XINST = OFF
  CONFIG  DEBUG = OFF
  CONFIG  CP0 = OFF
  CONFIG  CP1 = OFF
  CONFIG  CP2 = OFF
  CONFIG  CP3 = OFF
  CONFIG  CPB = OFF
  CONFIG  CPD = OFF
  CONFIG  WRT0 = OFF
  CONFIG  WRT1 = OFF
  CONFIG  WRT2 = OFF
  CONFIG  WRT3 = OFF
  CONFIG  WRTC = OFF
  CONFIG  WRTB = OFF
  CONFIG  WRTD = OFF
  CONFIG  EBTR0 = OFF
  CONFIG  EBTR1 = OFF
  CONFIG  EBTR2 = OFF
  CONFIG  EBTR3 = OFF
  CONFIG  EBTRB = OFF
#ENDCONFIG

[pascalou95]

bonjour,
j'utilise la version PBP 4.0.0.0 et MPLAB 8.92.
le quartz est un 4mhz.
je voudrais savoir si je peux et comment programmer les bits fusibles dans pbp et savoir comment cela s’écrit.
je peux vous envoyez, si vous voulez le programme de mon montage, si cela vous permet de mieux comprendre.
pascal

[richard]

Hello,
I use the version PBP 4.0.0.0 and MPLAB 8.92.
the quartz is a 4mhz.

I can send you, if you want the program of my editing, if this allows you to better understand.
pascal

version 4.0.0.0 is the microcode studio version

pbp version is v3.x.x.x or 2.xx

I would like to know if I can and how to program the fuse bits in pbp and know how this is written.

my previous reply is one way that will do it for pbp 3.xxx

its done differently for pbp 2.xxx . I have not used that old version for several years and can offer no help for it
meconfig suggests this

ASM
  __config  _CONFIG1L, _PLLDIV_1_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L
  __config  _CONFIG1H, _FOSC_HSPLL_HS_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
  __config  _CONFIG2L, _PWRT_OFF_2L & _BOR_ON_2L & _BORV_3_2L & _VREGEN_ON_2L
  __config  _CONFIG2H, _WDT_ON_2H & _WDTPS_512_2H
  __config  _CONFIG3H, _CCP2MX_ON_3H & _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _MCLRE_OFF_3H
  __config  _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _XINST_OFF_4L & _DEBUG_OFF_4L
  __config  _CONFIG5L, _CP0_OFF_5L & _CP1_OFF_5L & _CP2_OFF_5L & _CP3_OFF_5L
  __config  _CONFIG5H, _CPB_OFF_5H & _CPD_OFF_5H
  __config  _CONFIG6L, _WRT0_OFF_6L & _WRT1_OFF_6L & _WRT2_OFF_6L & _WRT3_OFF_6L
  __config  _CONFIG6H, _WRTC_OFF_6H & _WRTB_OFF_6H & _WRTD_OFF_6H
  __config  _CONFIG7L, _EBTR0_OFF_7L & _EBTR1_OFF_7L & _EBTR2_OFF_7L & _EBTR3_OFF_7L
  __config  _CONFIG7H, _EBTRB_OFF_7H
ENDASM