Is it possible to interpret non-standard serial data with PicBasic (sample attached)

[CuriousOne]

Thanks, will give it a try tomorrow.

My oscilloscope can record in .csv format, is it possible in some emulator to "play back" this recording, and feed it to virtual chip? So I can test and debug without using original hardware, which generates these pulses.

[richard]

the waveform is simple to simulate like this is you have a chip with a dsp module.
note the timings are estimated since the curious one's info is lacking most of the meaningful detail

'****************************************************************
'*  Name    : MODULATOR.BAS                                     *
'*  Author  : [select VIEW...EDITOR OPTIONS]                    *
'*  Notice  : Copyright (c) 2016 [select VIEW...EDITOR OPTIONS] *
'*          : All Rights Reserved                               *
'*  Date    : 5/29/2016                                         *
'*  Version : 1.0                                               *
'*  Notes   :                        *
'*          : 16F1825                                           *
'****************************************************************
  #CONFIG
             __config        _CONFIG1,    _FOSC_INTOSC & _CP_OFF & _WDTE_ON  &  _PWRTE_ON  &  _MCLRE_ON  & _CLKOUTEN_OFF
              __config      _CONFIG2, _PLLEN_ON & _LVP_OFF            
#ENDCONFIG
 
OSCCON=$70 
DEFINE OSC 32
 
'                       PIC 16F1825
 
TRISA     = %111111    ' Make all pins Input 
trisc     = %101111  ;Make all pins Input   
ANSELA=0     
ANSELC=0
MDSRC=    %00000000
MDCARH   =%11000100
MDCARL   =%00000000
X VAR byte
darta   VAR byte[4] 
TIMER1     VAR WORD EXT
clear
modout var latc.4
darta.0[15]=1 
hpwm 1,128,1600
MDCON.0 = 0
modout =0
Main_Loop:
modout=1
pauseus 8000
modout =0
while tmr2 :wend
MDCON=    %11000000
for x = 0 to 31
while tmr2 :wend
MDCON.0 = !  darta.0[x]
next  
modout=1
MDCON=    0
pauseus 600
modout = 0
PAUSE 200 
goto Main_Loop
end