Decline of PicBasic ?

[richard]

So for me it's a shame that PBP hasn't kept pace with things like TFT screens

did you upgrade to pbp3 ?
did you upgrade to pbp3.1 ?


is it any wonder progress has ceased ?

if you upgraded to pbp3 the tft include I provided to the forum is a working system that everyone who has tried it has got functional
all three of them that I know of.
imho pbp is dead with a small amount of deckchair shuffling [on titanic] going on .
I now have ported nearly all my code to xc8 , the mcc is a splendid thing for the chips it supports. my last stumbling block is usb-cdc, mcc seems to have missed usb support for the ubiquitous 18f4550

[Scampy]

Hi Richard,

No I didn't upgrade at the time due to the cost and personal circumstances. Maybe it's something that I should look at, but then you have already stated that you are porting your contributions to another platform and will (by the sounds of things) no longer supporting PBP, so maybe it's not a good time for me to upgrade to PB3 given how quiet it is around here and I should consider other options.

[mpgmike]

my last stumbling block is usb-cdc, mcc seems to have missed usb support for the ubiquitous 18f4550

Frankly, after spending 2 years struggling with USB I bit the bullet & purchased HIDmaker. Using HIDmaker, I'm better understanding what I read about and fought with for 2 years. The punch line is I'm functional with USB now.

Scampy and others, a very wise man once told me, "If it is to be, it is up to me." It's nice when I can post an issue on the forum and find someone that has tackled it already. However, when I can't, I just dive in and figure it out myself. All those wonderful Audrino Include files were developed by individuals with the attitude, "If it is to be, it is up to ME!"

[Ioannis]

Mike:
1. Since arduino libs you can find online are if I may say, un-official you cannot trust them for something serious. For hobby it is ok
2. About the hid maker. Can you build a project and never worry about port settings like USB to serial converters? I mean make a really plug and play device?

Ioannis

[mpgmike]

HIDmaker creates the files needed to transfer data between the PIC (in variations of C as well as PBP) and the PC (in Visual Basic, Delphi, and I believe another tool). You get skeletal code to build around. After playing with it for a few months, I'm developing quite a sophisticated dashboard for my controllers. As for the port settings, I just find it and connect. I love HIDmaker!

[Ioannis]

That's nice. So I need to extend now on VB...

Ioannis

[mpgmike]

There is a few sites with a limited function free version. I bought the professional version of Visual Studio 2015. Of course, the newest is 2017. I also bought about a half dozen books to try to learn how to use it. I have worked with industrial PLCs & HMIs in the past which helped me grasp VB quicker than I otherwise could have. At this point I'm barely functional with VB, but I'm getting some cool things done with it.

[Ioannis]

VB6 used to produce easily a stand alone installer to distribute to others.

After that the new studio I tried was too complicated and never managed to make a stand alone installer.

Also I found it much different (as a language) and had not enough time to learn it. Was not proficient with VB6 either but seemed easier to make small projects.

VB6 does not work on new systems anyway. A solution for now I found is to ask a friend and do some apps on LabView but I really have to do the VB way some day.

Ioannis