Hi,
I could use some help choosing the correct PIC. I need to have 2 independent PWM outputs to be used for generating two distinct tones. The only other thing required is to have two input pins to trigger the PWM outputs and a few inputs for dip switches to select the frequencies. I have spare 16f1938, 18F14k22 chips. I would like to keep the pin count as small as possible. The 16f1938 shows 3 ECCP ports, which I thought was all you need, but then it shows 0 for stand alone PWM. The Hardware PWM seems confusing to me once you go over one output so I want to make sure I am at least stating with a micro that can do what I need to do since I don’t really have enough hair left to pull out.
I am using PicBasic 2.6c

Thanks,
Jim