Multi-Button CSM with Pic16LF722A

[richard]

for barry

Has anyone had any experience with a 2 channel CSM slide switch?
I would like to implement a slide switch rather than an up / down button arrangement to select the PWM output for a LED string.
In my case, the granularity is quite coarse - only eight steps of PWM selection.

have now, seems to work nicely

slider as per http://ww1.microchip.com/downloads/e...tes/01250a.pdf
made on ds board the bottom side is unconnected, slider pad are 10mm*40mm the top is grounded
covered with sticky tape (durex for a sniker from the euro's)
see pic