Programming 16F877a PLCC with the melab programmer problem

Closed Thread
Results 1 to 3 of 3
  1. - 17th April 2016, 16:35 #1
    Sabahan's Avatar
    Sabahan
    Sabahan is offline Junior Member
    Join Date
    Jun 2013
    Posts
    31

    Default Programming 16F877a PLCC with the melab programmer problem

    I try to rpogram the PLCC version of the PIC16F877A with a PLCC to DIP programmer with the melab U2 programmer but it report the device dose not match the selected device,but I can program the DIP version of the same chip,can anybody help me with this issue?
  2. - 18th April 2016, 04:59 #2
    Demon's Avatar
    Demon
    Demon is offline SuperMod
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    3,154

    Did you find this post helpful? Yes | No

    Default Re: Programming 16F877a PLCC with the melab programmer problem

    http://www.microchip.com/forums/m308399.aspx

    Is your PIC soldered or are you using a socket?

    Are you sure about the orientation of your PIC?

    Robert
    My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.

    Not as dumb as yesterday, but stupider than tomorrow!
  3. - 19th April 2016, 00:18 #3
    Sabahan's Avatar
    Sabahan
    Sabahan is offline Junior Member
    Join Date
    Jun 2013
    Posts
    31

    Did you find this post helpful? Yes | No

    Default Re: Programming 16F877a PLCC with the melab programmer problem

    I can program it with a pick it 2 using its pro maker to go function,so I'm sure the mcu is ok,I'm using a adaptor bought from RS components and I've checked the connection,is all ok,and the PIN number is correctl
« Previous Thread | Next Thread »

Similar Threads

  1. Programming Stepper motor using 16f877a
    By SolaiKannan in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 20th January 2012, 19:05
  2. PM Asembler and Melab U2 Programmer Problems with PIC16F1939
    By rsocor01 in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 6th January 2011, 04:11
  3. 16F877A Programmer not found.
    By jcampbell in forum mel PIC BASIC
    Replies: 2
    Last Post: - 9th November 2010, 17:26
  4. Programming problem while interfacing keypad with pic 16f877a
    By uaf5000 in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 20th July 2010, 17:52
  5. MELab Programming
    By tarr in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 22nd March 2006, 13:36

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules