Going back to basics, some advice on memory storage

[richard]

horses an water

I try again this seems to have gone through to the keeper
http://www.picbasic.co.uk/forum/showthread.php?t=20966


arrays and the ext modifier don't exist for no reason

data_block var byte[96]
i var byte
ch_max var word ext   ;accessable as ch_max[0] to ch_max[15]
ch_on  var word ext   ;accessable as ch_on[0] to ch_on[15]
ch_off var word ext   ;accessable as ch_off[0] to ch_off[15]

asm
ch_max =  data_block
ch_on  =  data_block+32
ch_off =  data_block+64
endasm
save_data:
for i = 0 to 95
write 8+i ,data_block[i]
next
return
read_data:
for i = 0 to 95
read 8+i ,data_block[i]
next
return

set_defaults:
for i=0 to 15
ch_max[i]= 3000
ch_on[i}= 1800
ch_off[i]=600
next
return

[Scampy]

Richard, your previous posts hadn't been overlooked... I was trying to keep my explanation as simple as possible with regards to the locations in order to help explain what I was looking for, which was info on the correct way to use the DATA and EEPROM statements... which you appear to of overlooked in your reply whilst you were hell bent on being sarcastic with your

horses an water

I try again this seems to have gone through to the keeper"