Nick,
PBPro SHIFTIN does not work for > 50khz clock. The digital calipers output a clock of 90khz. How do I set up a synchronous serial input given those requirements?
as of the information I have gathered so far the caliper interface operates @ 90kHz.

And it atcs as SPI-Master, so SHIFTIN wouldn't work, as it claims to be Master, not Slave
(The Caliper provides the clock, not the PIC)

You will have to write your own SPI-Slave Routines.

I am confused as to the actual output data rate of the calipers. The project deals with interfacing to a PC so my conclusion is that the 9600bps is to the PC? or am I incorrect?
That is absolutely correct!


[qoute]