a problem RF Signal with PULSIN

Results 1 to 7 of 7

Threaded View

  1. - 21st July 2005, 09:59 #2
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Smile

    Hi,

    Solution is evident:

    pulsin measures a pulse, beginning with the Low to high transition ... in your example, the signal is already high when Pulsin begins ...

    No L>H transition ... Pulsin = 0 !!! ( cause overflow ...)

    The solution : Use RC Time command and add to the result the time needed by the test on RFCOD ...

    Alain

    PS: take care to carefully verify the PULSIN_MAX define ...
    Last edited by Acetronics2; - 21st July 2005 at 10:02.
« Previous Thread | Next Thread »

Similar Threads

  1. Funny PULSIN values: what is going on???
    By xnihilo in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 30th April 2008, 08:02
  2. problem with sending data using RF module
    By rano_zen06 in forum mel PIC BASIC Pro
    Replies: 51
    Last Post: - 10th April 2008, 17:08
  3. Pulsin 16F819 problem
    By rekcahlaer in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 11th April 2007, 13:52
  4. Problem interfacing ADXL202 and Accustar Clinometer with 16F876A
    By Beatrix in forum mel PIC BASIC Pro
    Replies: 11
    Last Post: - 13th July 2005, 19:26
  5. problem with RF receiver
    By nanami7702002 in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 31st January 2005, 21:55

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules