On Screen Displays?

[F1CHF]

hi WB6NSN
I didn't understand if you have done "something" using this old STV5730
for my antenna position, I do not remenber, it was for our TVA repeater, but now it is dead !
the house where the repeater was installed is down ...
I see this article .. inscrustation in French means OSD ..
have a look http://f5mna.free.fr/Arduino.htm
good luck
Francois

[Ramius]

Hi Francois!
Actually I have not done anything yet, still researching the options. In my previous post I just wanted you to know that I was also an "amateur radio" or "ham" radio operator also! The link you posted (Thank you) is for the MAX7456 which is a common white text only chip design and not a color text chip like the STV5730A. The STV5730A had, at one time, been considered "end of life" and the demand for the chip caused the manufacturer to start producing them again so they are not difficult to find anymore. I was hoping to find a PIC program for the STV5730 rather than having to "re-invent the wheel". Sorry about your repeater I miss my as well. If you find any programs for the STV5730 please let me know.

Thanks, Ed

[F1CHF]

YES I have done ! for a compagny who do not exist anymore !
don't kick my leg, it was in 2006 or 2008 so the design is in Beginner mode !
You will find all I have here :
http://f1chf.free.fr/TDC/autonome

tell me when the download is clear on your side, I will delete it after.
and as far as I remember TEXTS were in White ... no color needed in this application

feel free (direct F1CHF at free dot fr)

happy new year for everybody, a super Christmas first
Francois

[Ramius]

Thanks Francois!
Very interesting! The circuit board is a little confusing I see the xtal for the PIC and STV5730 and no STV5730!

[F1CHF]

you are right because the TOP board hide the Bottom one
don't hesitate to use the PROTEUS software to see the files ISIS and ARES
there is a demo version here
http://www.labcenter.com/index.cfm

if I have your email I will try to send you better files
francois