Error Compiling with PbP 3

[fratello]

No change !

@ ERRORLEVEL -306 
#CONFIG
 __CONFIG _XT_OSC & _WDT_OFF & _PWRTE_ON & _MCLRE_ON & _BODEN_ON & _LVP_OFF & _CP_ON  		
#ENDCONFIG

;INCLUDE "D:\PBP\ALLDIGITAL.PBP"
DEFINE OSC 4             ' 4MHz 
CMCON = 7                ' Disable on-chip comparator, PORTA in digital mode   

TRISA = %00011100           	
PORTA = %00011100
TRISB = %00000000
PORTB = %00000000

oldState VAR BYTE
newState VAR BYTE
status_1 VAR BYTE
status_2 VAR BYTE
status_3 VAR BYTE
DIR      VAR Byte
j        var byte
BitCount VAR BYTE           	' Index variable for above array
i        VAR BYTE           	' General purpose

dir = 2
Main:
    PortA.1 = 0
    newState = PortA & %00011100         ; this is for my hw : 11100 = 28
    PortA.1 = 1

[HenrikOlsson]

You seem to have the 628 selected in one of the screenshots, and the 628A in the other.
Which device is teh code INTENDED for and which device do you have selected in the dropdown list?

/H.

[fratello]

Sorry, is 16F628A !

[HenrikOlsson]

Well, then there must be some hidden character in there because if I copy/paste the code from post #10 above and compile it for a 16F628A it works just fine.

[pedja089]

Or you have version 2.6 or older...

[HenrikOlsson]

Surely THAT can't be it when the thread title is Error Compiling with PbP 3 located in the forum section called PBP3....or can it... :-)

[fratello]

Don't know how...but solved. Thanks !