Error Compiling with PbP 3

[Tabsoft]

Try this link about meConfig.

[HenrikOlsson]

You didn't follow my advice from the other thread....
When you use the #CONFIG/#ENDCONFIG block you can't also have the @ in there and you can only set the CONFIG bits with it, you can't include the error lever stuff within the block. So, the original

@ ERRORLEVEL -306   ; Retira o erro de crossing page boundary
@ __CONFIG  _CP_OFF  & _DEBUG_OFF & _CP_OFF & _CPD_OFF & _LVP_OFF & _BODEN_OFF & _PWRTE_ON & _WDT_OFF & _XT_OSC

Becomes

@ ERRORLEVEL -306   ; Retira o erro de crossing page boundary
#CONFIG
  __CONFIG  _CP_OFF  & _DEBUG_OFF & _CP_OFF & _CPD_OFF & _LVP_OFF & _BODEN_OFF & _PWRTE_ON & _WDT_OFF & _XT_OSC 
#ENDCONFIG

/Henrik.

[srspinho]

Thank you Henrik and TabSoft !

I will test it today !

My best regards.

Sérgio Pinheiro

[srspinho]

Hy Guys !

thank you for the tips. It worked !

My best regards.

Sérgio

[fratello]

Hi !
For me the solution don't work ? Any others sugestions ? Thanks !

[HenrikOlsson]

It doesn't work for you because you have not applied the solution. Read the thread again.

/Henrik.

[fratello]

Thanks for fast reply !
But ... I don't understand what I do wrong ...
I wrote :

@ ERRORLEVEL -306
#CONFIG
__CONFIG _XT_OSC & _WDT_OFF & _PWRTE_ON & _MCLRE_ON & _BODEN_ON & _LVP_OFF & _CP_ON
#ENDCONFIG

Exactly like in post #3.