Circuit question

[Fredrick]

LinkMTech: Thank you very much!
I'm a little wiser now

[Ioannis]

I would not use a BS250 since it has high leak current.

Better choice would be a PNP transistor like the BC857 with a BC847 pair to turn it on.

Resistor would also be dimensioned lower, say c-b at 10K to keep the PNP off and another 10K to turn it on by the other NPN transistor.

I use such a selection for a commercial product working on a 9V battery. My caps are 10uF and charge through PNP internal resistor with no problem.

Ioannis