OT - (slightly) - Bluetooth issues

[Scampy]

Interestingly, when it does install a com port it provides 2 ports one for incoming and the other for outgoing... no that's going to confuse things !!

OK - I've I'm now perplexed - LED on the module is still flashing rapidly, windows added a serial port under the Bluetooth settings and assigned port com9 - just the one - it didn't ask for a pairing code though which was strange, and whilst everything looks fine in device manager etc, it's impossible to communicate with the device via a serial terminal, the application just hangs when trying to open the port....

[Scampy]

OK - managed to get a steady locked LED and the device is paired up - Device manager shows com9 and com11 - StemPro connects to com9 and I can send AT commands - but nothing is received , and com11 won't open !!

This won't be too much of in issue under PBP as I can modify the code so that serial out goes down one pin (B0 for example) and serial in comes in via another (B1 for example)... But then this assumes that windows will assign the same port numbers each time on all devices.

[Scampy]

We'll I managed to get a connection, and send and receive data, but the connection soon dropped out ! - More to play about with, but thanks for your input guys