A tft addin for pbp3

Results 1 to 40 of 142

Threaded View

  1. - 31st August 2015, 00:22 #10
    richard's Avatar
    richard
    richard is offline Prolific Poster
    Join Date
    May 2013
    Location
    australia
    Posts
    2,714

    Did you find this post helpful? Yes | No

    Default Re: A tft addin for pbp3

    these displays are 3.3v devices . the only pin that is different is the vcc pin that leads to a 3.3v ldo regulator . my displays function ok with vcc =3.3v . one has a jumper to bypass the regulator if desired but this has not been necessary .
    see schematic
    ps the schematic shows the mclr pullup resistor connected to gnd , this is wrong it should be vcc
    Attached Images Attached Images
    Last edited by richard; - 31st August 2015 at 00:25.
« Previous Thread | Next Thread »

Similar Threads

  1. A simple 3.2" TFT color LCD with Touch Panel test project
    By Oldspring in forum General
    Replies: 0
    Last Post: - 25th September 2013, 19:33
  2. code examples / libraries for ILI9320 2.8" TFT LCD Module
    By longpole001 in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 6th June 2013, 09:50
  3. I really need some help with PBP3
    By Ramius in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 26th February 2012, 17:05
  4. What's with PBP3?
    By BrianT in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 10th August 2011, 18:09
  5. Experience of driving TFT screens?
    By isaac in forum General
    Replies: 1
    Last Post: - 26th September 2008, 01:15

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules