A tft addin for pbp3

[richard]

SSP_IF VAR PIR3.7 'I don't understand what it mean

THE SSP_IF VAR IS an alias to the SSP Interrupt Flag where PIR3.7 is the SSP2IF if you use ssp1 then use PIR1.3 for your chip

symbol tft_dc_bit = PORTB.5
symbol tft_cs_bit = PORTB.4
symbol tft_rst_bit = PORTB.7

you are asking for rmw trouble by using portb use latb instead

symbol tft_dc_bit = latb.5       >>with  matching  constant     tft_dc_bit  con  32     ie 2^5
symbol tft_cs_bit = latb.4                        "              "            tft_cs_bit  con  16     ie 2^4
symbol tft_rst_bit = latb.7                       "              "            tft_rst_bit con 128     ie 2^7
tft_port var  latb

SDi from display I connect to PORD.4 and SCK from display I connect to PORTD.0 on PIC processor

correct for a PIC18F45K22 PORTD.4 is SDO2 and connects to display sdi
and PORTD.0 is SCK2 and connects to display sck