Hi all,
I'm using this code to load an array with a certain text string

Code:
inbuff VAR BYTE(100)  
arraywrite inbuff,["Sample test string"]
I have many different string in variuos parts of the program and this code consumes a lot of space, so I would like to optimize it using macros .

It's easy to store the string in code space and then with a macro retrieve the address and read it:

Code:
ROM_String1:       PokeCode "Sample test string",0


; macro to retrieve the address

@getaddr	macro Text, Addr
@ 	movlw low Text
@ 	movwf Addr
@ 	movlw High Text
@ 	movwf Addr + 1
@ endm


; code
	@ getaddr _ROM_String1, _w0
  repeat
    peekcode w0, x
    if x then 
      debug x
      w0=w0+2
    endif
  until x=0                                     ' print till end of string '0'

Sb00:
	.....
Now I have some difficulties to continue: instead of print the string, I need to store it in RAM, the same things that does ArrayWrite.
So the macro should be modified to accept as parameters, the source ROM string and the destination address in RAM
Something like

Code:
@ LoadStr _ROM_CfgString, _inbuff
So calling the macro I can specify any string stored in ROM and any RAM destination where to put it.
Could anybody help me to complete the macro ?
Thanks
Marco