18F25K20 osc setting problem

Closed Thread
Results 1 to 20 of 20

Hybrid View

  1. - 3rd June 2015, 18:48 #1
    Gevo's Avatar
    Gevo
    Gevo is offline Junior Member
    Join Date
    Jul 2005
    Location
    The Netherlands
    Posts
    40

    Did you find this post helpful? Yes | No

    Default Re: 18F25K20 osc setting problem

    I have update MPLAB IDE to v8.92

    So, MPASM is now v5.51

    I think this is the last version of MPLAB IDE
  2. - 3rd June 2015, 20:17 #2
    Dave's Avatar
    Dave
    Dave is offline Prolific Poster
    Join Date
    Mar 2003
    Location
    Commerce Michigan USA
    Posts
    1,166

    Did you find this post helpful? Yes | No

    Default Re: 18F25K20 osc setting problem

    Gevo, This compiles just fine for me.

    #CONFIG
    __CONFIG _CONFIG1H, _FOSC_INTIO67_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
    __CONFIG _CONFIG2H, _WDTEN_ON_2H & _WDTPS_512_2H
    __CONFIG _CONFIG3H, _CCP2MX_PORTC_3H & _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _HFOFST_ON_3H & _MCLRE_ON_3H
    __CONFIG _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _XINST_OFF_4L
    #ENDCONFIG

    In fact I use MPLAB 8.73a
    I am how ever using PBPX 3.0.7.4
    Dave Purola,
    N8NTA
    EN82fn
  3. - 3rd June 2015, 20:49 #3
    Gevo's Avatar
    Gevo
    Gevo is offline Junior Member
    Join Date
    Jul 2005
    Location
    The Netherlands
    Posts
    40

    Did you find this post helpful? Yes | No

    Default Re: 18F25K20 osc setting problem

    Hi Dave,

    Thanks for your input. This give errors for PBP Pro...

    error (122) Illegal opcode (_CONFIG1H)
    error (122) Illegal opcode (_CONFIG2H)
    error (122) Illegal opcode (_CONFIG3H)
    error (122) Illegal opcode (_CONFIG4L)

    If have plans to upgrade to PBP3 :-)
  4. - 3rd June 2015, 22:18 #4
    towlerg's Avatar
    towlerg
    towlerg is offline Member
    Join Date
    Apr 2013
    Posts
    272

    Did you find this post helpful? Yes | No

    Default Re: 18F25K20 osc setting problem

    I think the #CONFIG syntax was introduced with v3.

    George
  5. - 4th June 2015, 01:36 #5
    Scampy's Avatar
    Scampy
    Scampy is offline Senior Member
    Join Date
    Oct 2009
    Posts
    583

    Did you find this post helpful? Yes | No

    Default Re: 18F25K20 osc setting problem

    The the following.

    Browse to where you have your PBP2.60 folder installation. Scroll down until you find the 18F25K20.INC file and open it in notepad. It should look something like this

    Code:
    ;****************************************************************
;*  18F25K20.INC                                                *
;*                                                              *
;*  By        : Leonard Zerman, Jeff Schmoyer                   *
;*  Notice    : Copyright (c) 2008 microEngineering Labs, Inc.  *
;*              All Rights Reserved                             *
;*  Date      : 09/15/08                                        *
;*  Version   : 2.60                                            *
;*  Notes     :                                                 *
;****************************************************************
        NOLIST
    ifdef PM_USED
        LIST
        "Error: PM does not support this device.  Use MPASM."
        NOLIST
    else
        LIST
        LIST p = 18F25K20, r = dec, w = -311, w = -230, f = inhx32
        INCLUDE "P18F25K20.INC"	; MPASM  Header
        __CONFIG    _CONFIG1H, _FOSC_HS_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
        __CONFIG    _CONFIG2H, _WDTEN_ON_2H & _WDTPS_512_2H
        __CONFIG    _CONFIG3H, _CCP2MX_PORTC_3H & _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _HFOFST_ON_3H & _MCLRE_ON_3H
        __CONFIG    _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _XINST_OFF_4L
        NOLIST
    endif
        LIST
EEPROM_START	EQU	0F00000h
BLOCK_SIZE	EQU	32
    Under the section "Include P18F25k20.inc" you'll see all the config settings... comment out all four lines thus:

    Code:
    ;****************************************************************
;*  18F25K20.INC                                                *
;*                                                              *
;*  By        : Leonard Zerman, Jeff Schmoyer                   *
;*  Notice    : Copyright (c) 2008 microEngineering Labs, Inc.  *
;*              All Rights Reserved                             *
;*  Date      : 09/15/08                                        *
;*  Version   : 2.60                                            *
;*  Notes     :                                                 *
;****************************************************************
        NOLIST
    ifdef PM_USED
        LIST
        "Error: PM does not support this device.  Use MPASM."
        NOLIST
    else
        LIST
        LIST p = 18F25K20, r = dec, w = -311, w = -230, f = inhx32
        INCLUDE "P18F25K20.INC"	; MPASM  Header
        ;__CONFIG    _CONFIG1H, _FOSC_HS_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
        ;__CONFIG    _CONFIG2H, _WDTEN_ON_2H & _WDTPS_512_2H
        ;__CONFIG    _CONFIG3H, _CCP2MX_PORTC_3H & _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _HFOFST_ON_3H & _MCLRE_ON_3H
        ;__CONFIG    _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _XINST_OFF_4L
        NOLIST
    endif
        LIST
EEPROM_START	EQU	0F00000h
BLOCK_SIZE	EQU	32
    Now include the settings in your main PBP code
    Code:
    ASM
    @ __CONFIG    _CONFIG1H, _FOSC_INTIO67_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
    @ __CONFIG    _CONFIG2H, _WDTEN_ON_2H & _WDTPS_512_2H
    @ __CONFIG    _CONFIG3H, _CCP2MX_PORTC_3H & _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _HFOFST_ON_3H & _MCLRE_ON_3H
    @ __CONFIG    _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _XINST_OFF_4L
ENDASM
    This should compile correctly in PBP 2.60
  6. - 4th June 2015, 01:39 #6
    Scampy's Avatar
    Scampy
    Scampy is offline Senior Member
    Join Date
    Oct 2009
    Posts
    583

    Did you find this post helpful? Yes | No

    Default Re: 18F25K20 osc setting problem

    Quote Originally Posted by towlerg View Post
    I think the #CONFIG syntax was introduced with v3.

    George
    That's correct...

    Quote Originally Posted by Dave View Post
    Gevo, This compiles just fine for me.

    #CONFIG
    __CONFIG _CONFIG1H, _FOSC_INTIO67_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
    __CONFIG _CONFIG2H, _WDTEN_ON_2H & _WDTPS_512_2H
    __CONFIG _CONFIG3H, _CCP2MX_PORTC_3H & _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _HFOFST_ON_3H & _MCLRE_ON_3H
    __CONFIG _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _XINST_OFF_4L
    #ENDCONFIG
    Dave, the OP is using 2.60. It doesn't support the #CONFIG /#ENDCONFIG satements
  7. - 4th June 2015, 16:06 #7
    Gevo's Avatar
    Gevo
    Gevo is offline Junior Member
    Join Date
    Jul 2005
    Location
    The Netherlands
    Posts
    40

    Did you find this post helpful? Yes | No

    Angry Re: 18F25K20 osc setting problem

    Hello Scampy, thanks for the workout.

    I have comment out the four line's in the .INC file (PBP folder)

    I have add the line's to PBP main code and get errors after compiling. (PBP v2.60C)

    4 time this error > [warning 207] .... Found label after column 1. (@)
    4 time this error > [error 121] illegal label (@)

    I don't understand why PBP give this error, the instructions/settings are equal as in de .INC file what you advice me to comment out.

    If change some __ like this;

    ASM
    @_CONFIG _CONFIG1H, _FOSC_INTIO67_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
    @_CONFIG _CONFIG2H, _WDTEN_ON_2H & _WDTPS_512_2H
    @_CONFIG _CONFIG3H, _CCP2MX_PORTC_3H & _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _HFOFST_ON_3H & _MCLRE_ON_3H
    @_CONFIG _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _XINST_OFF_4L
    ENDASM
    Now I get 4 other errors:

    Error [122] illegal opcode (_CONFIG1H)
    Error [122] illegal opcode (_CONFIG2H)
    Error [122] illegal opcode (_CONFIG3H)
    Error [122] illegal opcode (_CONFIG4L)

    Pfff, all this to get RA6 and RA7 as I/O...
  8. - 4th June 2015, 17:11 #8
    Scampy's Avatar
    Scampy
    Scampy is offline Senior Member
    Join Date
    Oct 2009
    Posts
    583

    Did you find this post helpful? Yes | No

    Default Re: 18F25K20 osc setting problem

    Quote Originally Posted by Gevo View Post
    Hello Scampy, thanks for the workout.

    I have comment out the four line's in the .INC file (PBP folder)

    I have add the line's to PBP main code and get errors after compiling. (PBP v2.60C)

    4 time this error > [warning 207] .... Found label after column 1. (@)
    4 time this error > [error 121] illegal label (@)

    I don't understand why PBP give this error, the instructions/settings are equal as in de .INC file what you advice me to comment out.
    The following compiles fine using PBP 2.60c and MPASM 5.06 (old but that's not what's causing your problem.

    Code:
    '****************************************************************
'*  Name    : UNTITLED.BAS                                      *
'*  Author  : [select VIEW...EDITOR OPTIONS]                    *
'*  Notice  : Copyright (c) 2015 [select VIEW...EDITOR OPTIONS] *
'*          : All Rights Reserved                               *
'*  Date    : 04/06/2015                                        *
'*  Version : 1.0                                               *
'*  Notes   :                                                   *
'*          :                                                   *
'****************************************************************

        
ASM  
     __CONFIG    _CONFIG1H, _FOSC_HS_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
     __CONFIG    _CONFIG2H, _WDTEN_ON_2H & _WDTPS_512_2H
     __CONFIG    _CONFIG3H, _CCP2MX_PORTC_3H & _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _HFOFST_ON_3H & _MCLRE_ON_3H
     __CONFIG    _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _XINST_OFF_4L
ENDASM
    Notice that there are no @'s in the config settings, and that I have the config settings indented. If you have the underscore (_) at the start of column 1 you get those errors.

    Cut and paste those settings at the start of your code, make sure you have the 18F25K20 selected in microcode studio and hit the compile button
« Previous Thread | Next Thread »

Similar Threads

  1. DEFINE OSC Serout problem
    By Bonxy in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 10th April 2010, 17:19
  2. 18F25K20 and EEPROM - Bug ???
    By BigWumpus in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 2nd March 2009, 21:14
  3. 18F25K20 & ANSEL = Error
    By BigWumpus in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 17th December 2008, 02:36
  4. 18f2550 USB OSC Problem
    By serkanc in forum USB
    Replies: 10
    Last Post: - 29th October 2008, 20:52
  5. Setting OSC pins to o/p's
    By jmgelba in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 20th October 2005, 21:34

Members who have read this thread : 0

You do not have permission to view the list of names.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules