PIC16F676 troubles

Results 1 to 8 of 8

Threaded View

  1. - 28th May 2015, 23:03 #8
    Tabsoft's Avatar
    Tabsoft
    Tabsoft is offline Member
    Join Date
    Jan 2013
    Location
    Texas USA
    Posts
    229

    Did you find this post helpful? Yes | No

    Default Re: PIC16F676 troubles

    Good deal.

    I suspect with the Comparator module set to 000 whenever you perform a Toggle command this actually reads the port then writes the new value to it. This issue is that the port will always read 0 when it is configured in Reset mode.
    Last edited by Tabsoft; - 28th May 2015 at 23:06.
    Regards,
    TABSoft
« Previous Thread | Next Thread »

Similar Threads

  1. PIC16F676 RS232 baud rate
    By jrprogrammer in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 12th February 2010, 14:16
  2. PIC16F676 Problem
    By Atom058 in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 19th April 2007, 16:05
  3. Interfacing RTC (DS1302) with pic16F676
    By Andrew_A in forum Off Topic
    Replies: 1
    Last Post: - 14th February 2006, 08:49
  4. PIC16F676 I/O Problems.
    By BobEdge in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 7th March 2005, 16:37
  5. PIC16F676 Troubles
    By BobEdge in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 27th February 2005, 10:01

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules