Hserout

Closed Thread
Results 1 to 12 of 12

Thread: Hserout

Hybrid View

  1. - 17th May 2015, 02:07 #1
    mazytis's Avatar
    mazytis
    mazytis is offline Junior Member
    Join Date
    May 2015
    Posts
    7

    Default Hserout

    Hi,
    I need to do serial output with PIC12F675 using HSEROUT.

    It's possible?

    Sorry for my English speech.
  2. - 17th May 2015, 03:35 #2
    richard's Avatar
    richard
    richard is offline Prolific Poster
    Join Date
    May 2013
    Location
    australia
    Posts
    2,631

    Did you find this post helpful? Yes | No

    Default Re: Hserout

    no get a 12f1822
  3. - 17th May 2015, 13:09 #3
    Charlie's Avatar
    Charlie
    Charlie is offline Senior Member
    Join Date
    Dec 2010
    Posts
    409

    Did you find this post helpful? Yes | No

    Default Re: Hserout

    Or just use SEROUT (no "H")
  4. - 17th May 2015, 17:48 #4
    Archangel's Avatar
    Archangel
    Archangel is offline SuperMod
    Join Date
    Aug 2006
    Location
    Look, behind you.
    Posts
    2,818

    Did you find this post helpful? Yes | No

    Default Re: Hserout

    Or use the DEBUG function, usually makes smaller code.
    If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
    .
    Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
    .
    There simply is no "Happy Spam" If you do it you will disappear from this forum.
  5. - 17th May 2015, 18:38 #5
    mazytis's Avatar
    mazytis
    mazytis is offline Junior Member
    Join Date
    May 2015
    Posts
    7

    Did you find this post helpful? Yes | No

    Default Re: Hserout

    I just used SEROUT.
  6. - 20th May 2015, 00:43 #6
    mazytis's Avatar
    mazytis
    mazytis is offline Junior Member
    Join Date
    May 2015
    Posts
    7

    Did you find this post helpful? Yes | No

    Default Re: Hserout

    Firstly I want to apologise for my English speech.
    What's wrong with my code? Receiver will not turning on LED, when transmitter sending command.

    Transmitter:
    Code:
    #CONFIG
    __config _INTRC_OSC_NOCLKOUT & _WDT_OFF & _CP_OFF & _MCLRE_OFF & _BODEN_OFF  & _PWRTE_OFF
#ENDCONFIG
DEFINE OSC 4
DEFINE ADC_BITS 10
DEFINE ADC_CLOCK 3
DEFINE ADC_SAMPLEUS 50
DEFINE SER_BAUD 1200 
DEFINE SER_CLROERR 1


CMCON = 7 : TRISIO = %00010001 : ADCON0.7 = 1 : ANSEL = %00011001


LED var GPIO.2
i var byte
Akumuliatorius VAR word
Lygis var word
Buves var word : Buves = 0
Buves1 var word
Buves2 var word


Adr1 var byte : Adr1 = %00111110
Adr2 var byte : Adr2 = %01101110
CMD1 VAR BYTE : cmd1 = %10111110
CMD2 var byte : cmd2 = %10011100
pause 100


FOR i = 1 TO 3
high led : pause 400
low led : pause 400
NEXT i
   
main:
ADCIN 0, akumuliatorius


if akumuliatorius <= 640 then
high led
else
low led
endif


adcin 3, lygis


Buves1 = Buves - 4 : Buves2 = Buves + 4


if Lygis <= Buves1 or Lygis >= Buves2 then
buves = lygis
SEROUT2 GPIO.1,813,[Adr1,Adr2,Lygis,CMD1,CMD2]
endif


goto main
end
    Receiver:
    Code:
    #CONFIG
    __config _INTRC_OSC_NOCLKOUT & _WDT_OFF & _CP_OFF & _MCLRE_OFF & _BODEN_OFF  & _PWRTE_OFF
#ENDCONFIG
DEFINE OSC 4
DEFINE SER_BAUD 1200
DEFINE SER_CLROERR 1


CMCON = 7 : TRISIO = %00100000


LED var GPIO.0
i var byte


Adr1 var byte : Adr1 = %00111110
Adr2 var byte : Adr2 = %01101110
CMD1 VAR BYTE
CMD2 var byte
Lygis var word
pause 100


FOR i = 1 TO 3
high led : pause 400
low led : pause 400
NEXT i
   
main:
SERIN2 GPIO.5,813,[wait (Adr1,Adr2),Lygis,cmd1,cmd2]
pause 10      
if cmd1 = %10111110 and cmd2 = %10011100 then
high led
else
low led
endif
pause 10
goto main
end
  7. - 20th May 2015, 13:23 #7
    mazytis's Avatar
    mazytis
    mazytis is offline Junior Member
    Join Date
    May 2015
    Posts
    7

    Did you find this post helpful? Yes | No

    Default Re: Hserout

    Still not working... :/

    Transmitter:
    Code:
    #CONFIG
    __config _INTRC_OSC_NOCLKOUT & _WDT_OFF & _CP_OFF & _MCLRE_OFF & _BODEN_OFF  & _PWRTE_OFF
#ENDCONFIG
DEFINE OSC 4
DEFINE ADC_BITS 10
DEFINE ADC_CLOCK 3
DEFINE ADC_SAMPLEUS 50
DEFINE SER_BAUD 2400 
DEFINE SER_CLROERR 1

CMCON = 7 : TRISIO = %00010001 : ADCON0.7 = 1 : ANSEL = %00011001
INCLUDE "modedefs.bas"

LED var GPIO.2
i var byte
Akumuliatorius VAR word
Lygis var word
Buves var word : Buves = 0
Buves1 var word
Buves2 var word

Adr1 var byte : Adr1 = %00111110
Adr2 var byte : Adr2 = %01101110
CMD1 VAR BYTE : cmd1 = %10111110
CMD2 var byte : cmd2 = %10011100
pause 100

FOR i = 1 TO 3
high led : pause 400
low led : pause 400
NEXT i
   
main:
ADCIN 0, akumuliatorius

if akumuliatorius <= 640 then
high led
else
low led
endif

adcin 3, lygis

Buves1 = Buves - 4 : Buves2 = Buves + 4

if Lygis <= Buves1 or Lygis >= Buves2 then
buves = lygis
SEROUT GPIO.1,T2400,[Adr1,Adr2,Lygis,CMD1,CMD2]
endif

goto main
end
    Receiver:
    Code:
    #CONFIG
    __config _INTRC_OSC_NOCLKOUT & _WDT_OFF & _CP_OFF & _MCLRE_OFF & _BODEN_OFF  & _PWRTE_OFF
#ENDCONFIG
DEFINE OSC 4
DEFINE SER_BAUD 2400
DEFINE SER_CLROERR 1

CMCON = 7 : TRISIO = %00100000
INCLUDE "modedefs.bas"

LED var GPIO.0
i var byte

Adr1 var byte
Adr2 var byte
CMD1 VAR BYTE
CMD2 var byte
Lygis var word
pause 100

FOR i = 1 TO 3
high led : pause 400
low led : pause 400
NEXT i
  
main:
SERIN GPIO.5,T2400,[Adr1,Adr2,Lygis,CMD1,CMD2] 
if Adr1 = %00111110 and ADR2 = %01101110 and cmd1 = %10111110 and cmd2 = %10011100 then
high led : pause 100
else
low led
endif
goto main
end
  8. - 20th May 2015, 13:42 #8
    richard's Avatar
    richard
    richard is offline Prolific Poster
    Join Date
    May 2013
    Location
    australia
    Posts
    2,631

    Did you find this post helpful? Yes | No

    Default Re: Hserout

    add a sync chr to the tx eg
    SEROUT GPIO.1,T2400,["*",Adr1,Adr2,Lygis,CMD1,CMD2]

    rx becomes

    SERIN GPIO.5,T2400,["*"],Adr1,Adr2,Lygis,CMD1,CMD2


    syntax for logical expressions is best done in parenthesis

    if (Adr1 = %00111110) and (ADR2 = %01101110) and (cmd1 = %10111110 )and (cmd2 = %10011100) then

    
  9. - 20th May 2015, 15:50 #9
    mazytis's Avatar
    mazytis
    mazytis is offline Junior Member
    Join Date
    May 2015
    Posts
    7

    Did you find this post helpful? Yes | No

    Default Re: Hserout

    Still the same. Maybe I don't configured something?
  10. - 21st May 2015, 03:10 #10
    richard's Avatar
    richard
    richard is offline Prolific Poster
    Join Date
    May 2013
    Location
    australia
    Posts
    2,631

    Did you find this post helpful? Yes | No

    Default Re: Hserout

    you might have a rmw issue

    try this


    Code:
    #CONFIG
    __config _INTRC_OSC_NOCLKOUT & _WDT_OFF & _CP_OFF & _MCLRE_OFF & _BODEN_OFF  & _PWRTE_OFF
#ENDCONFIG
DEFINE OSC 4
DEFINE ADC_BITS 10
DEFINE ADC_CLOCK 3
DEFINE ADC_SAMPLEUS 50
DEFINE SER_BAUD 2400 
DEFINE SER_CLROERR 1

CMCON = 7 : TRISIO = %00010001 : ADCON0.7 = 1 : ANSEL = %00011001
INCLUDE "modedefs.bas"

LED var GPIO.2
i var byte
Akumuliatorius VAR word
Lygis var word
Buves var word : Buves = 0
Buves1 var word
Buves2 var word

Adr1 var byte : Adr1 = %00111110
Adr2 var byte : Adr2 = %01101110
CMD1 VAR BYTE : cmd1 = %10111110
CMD2 var byte : cmd2 = %10011100
pause 100

FOR i = 1 TO 3
high led : pause 400
low led : pause 400
NEXT i
   
main:
ADCIN 0, akumuliatorius

if akumuliatorius <= 640 then
high led
else
low led
endif
gpio.0=1
adcin 3, lygis

Buves1 = Buves - 4 : Buves2 = Buves + 4

if Lygis <= Buves1 or Lygis >= Buves2 then
buves = lygis
SEROUT GPIO.1,T2400,["*",Adr1,Adr2,Lygis,CMD1,CMD2]
endif

goto main
end
« Previous Thread | Next Thread »

Similar Threads

  1. HSEROUT Disable
    By Dick Ivers in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 26th January 2012, 23:50
  2. HSEROUT problem
    By karlosguay in forum Serial
    Replies: 3
    Last Post: - 11th January 2012, 19:44
  3. Hserout
    By Andre_Pretorius in forum Serial
    Replies: 3
    Last Post: - 7th June 2007, 04:45
  4. Hserout
    By MICOCALI in forum mel PIC BASIC Pro
    Replies: 18
    Last Post: - 7th August 2004, 18:08
  5. HSEROUT and 16F628A
    By fredblah in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 6th May 2004, 00:07

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules