Just measured the resistance across the 10K pot on the EasyPic5 board. Between Vco and GND pins on the LCD connector I have 5.67K, with 3.12K between Vcc and Vco. I'll amend the schematic and put a 4.7K between GND and Vco
|
Re: LCD do display - but pins check out
Just measured the resistance across the 10K pot on the EasyPic5 board. Between Vco and GND pins on the LCD connector I have 5.67K, with 3.12K between Vcc and Vco. I'll amend the schematic and put a 4.7K between GND and Vco
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks