And, if you wanted more macro's... then I'm sure to make you happy today.
Wow! Am I ever! It'll keep me quite busy this week trying it out in my application.

In order to make this work, I ripped up your code pretty bad. Sorry!

For instance, I got rid of the whole Pushing and Popping stuff. I hated to do that, but at least it solves the interrupt problem.
I have no problem at all with this. At the time it was the only way I knew how to start heading in the direction I wanted to go. Perhaps it'll still be of use to someone, since there doesn't appear to be too much info out on the net showing actual application of this 18F series ability.

Major changes to the prntSTR section too. It had all the USART stuff in there that had to come out.
As you probably saw in my last code post, I had already ripped this out and gone ahead and used your USART initialize macro.

The Make_Destination and Director macro's are the real difference that allows the data to be re-directed. I'm sure there will be some questions on them, but for now I'll let you try to figure it out first.
Yes I do have questions, but I'll hold off until I have had ample time to digest it. And perhaps I wont if my brain can take it all in.

Well, have fun, and I hope this is closer to what you were looking for.
This is EXACTLY (and more) what I was looking for!
Thanks so very, very much,