DT Ints on 18F (First time user problem)

[richard]

try without
INCLUDE "ReEnterPBP-18LP.bas

your not using a lp int anyway

[HenrikOlsson]

Hi,
There are two WHILE 1 statements but only one WEND:

WHILE 1
A:		' CHECK IF MODEM IS WORKING OK AND SET ECHO OFF
			HSEROUT2 ["SENDING AT",13,10]
			HSEROUT ["AT",13,10]
			GoSub GetResponse			

			HSEROUT ["ATE0",13,10]
			GoSub GetResponse	
			HSEROUT2 ["ATE0 RESULT=OK",STR MESS\500,13,10]

WHILE 1
			HSEROUT2 ["SEND COMMAND",13,10]
			HSERIN2 [STR MESS\500\13]
			HSEROUT2 ["SENDING-",STR MESS,13,10]
			HSEROUT [STR MESS,13,10]
			GoSub GetResponse
WEND

Although compiling your code as it was did NOT give the error message you show removing one of the WHILE 1 makes it compile without errors. Make sure you're compiling for the correct device.
Finally, you generally don't want to have the reset flag option set to YES for the EUSART interrupt because the flag is cleared automatically by the hardware when the RX buffer is read.

/Henrik.

[financecatalyst]

Thanks. A few confirmations

• Device is 18LF45K22 and it is compiled for the same device
• Include 18LP file is commented
• First while1 is commented in my file, must be a mistake while copying/pasting/editing

Error is still there. Not sure if something needs changing in ReEnter file or DT_INT file?