OPTION_REG.7=0…… Or does it ?

[andybarrett1]

Hi all

Am using a 16f818 in a simple program …all is working BUT :-

OPTION_REG.7=0 ' Enables all pull-ups on PORTB

Question is What happens if only PORTB 0-3 are inputs and 4-7 are outputs….I thought I had seen a way of enabling . disabling some pins if this was the case…..

OR Does telling PBP that pin 4-7 are outputs do it for me ???

My program is working fine….. Just wondering !

Thank you for reading

Andy